You've received your Magic Leap 2 and are ready to get started.  Here are some tips for first time use.

• Remove the Magic Leap 2 and Controller from the box.
• Remove the protective covers from the inner lens, outer lens, and camera.

• If you have Prescription Inserts, pull back firmly to remove the Lens Insert,
  then replace it with your Prescription Insert

• You can optionally attach the Overhead Strap.  

• Clip the Compute Pack to your pocket or use the Shoulder Strap. See tips on Wearing your Magic Leap 2. 

• Make sure the Headset cable is free and not tangled up in the back of the Headset 

• To replace Nose Pad, grip between fingers and pull straight out of headset, not down.  Replace with a different size Nose Pad from the Fit Kit (included in the box).

• To replace Forehead Pad, simply pull the existing forehead off and replace it with the alternate Forehead Pad from the Fit Kit (included in the box).
• Power on the Compute Pack by holding the power button until you see the first LEDs illuminate.

• Ensure Compute Pack and Controller have sufficient charge.  See Compute Pack LED guide and Controller LED guide for status indicators.
• Follow the steps that appear on the Magic Leap 2 display to complete set up.